Sync EV Charge Station 7.2kw WiFi/GSM (Tethered)

SyncEV BG 7.4kW tethered wall charger with 7.5 metres of cable and a Type 2 plug, WiFi, 4G GSM and Smart! functionality. Offering installers quick and easy installation, with UK based technical support and backed by a 3 year warranty. Dekra certified.

Features

• Wifi connectivity with 4G GSM - free lifetime software updates over-the-air
• Full Smart! functionality - OCPP 1.6J connectivity
• Dynamic charging - up to 7.4 kW
• No earth rod required - integrated open PEN conductor protection
• Safe - integrated earth fault protection (RCD) + PEN protection system
• Tethered connection with 7.5m of cable and Type 2 connector
• Dimentions:
• Height: 260mm
• Width: 204mm
• Depth: 139mm

Specifications

• Code: EVT77G
• Type: Tethered With Type 2 Plug
• Cable: 7.5 Metre, Black H07BZ5-F3x6mm²
• Communication: Wi-Fi, 4G GSM
• Dimentions: 260 (H) X 204 (W) X 139 (D) MM
• KW : 7.4KW 32A MODE 3
• Min Charge Current : Configurable, 6 - 32A
• Electrical Input : 220-240V, 50-60Hz, Single Phase
• Colour: Base & Trim - RAL 9005 (Black) Body - RAL 7016 (Graphite Grey)
• Cable Management: Built in Cable Wrap
• PEN Protection: Yes, In-Built Earth Disconection
• Earth Rod: Not Required
• RCD Protection: Yes, 6mA DC, 30mA TYPE-A, In-Built
• Overload and Fault Protection: Over Current and Fault Protection
• Electrical Class: Class 1, Housing Class 2
• Load Balancing: Yes, Optional Accessory
• Consumer Unit Requirements: 40A MCB or 30mA TYPE-A RCD (Dependent on cable type &/or route)
• Terminals: First Fix Plug Connector
• Indicator: RGB LED and Buzzer
• Indicator modes: Blue - Standby, Green - Charging, Yellow - No Network, Red - Error
• Housing: UV Stabilised Polycarbonate
• Wall Fixing: 4 point with horizontal and vertical adjustment, supplied fixing hole template IP
• Rating: IP55
• IK Rating: IK10
• SOC Module: AI ESP32-S SOC
• Ethernet : RJ45
• WI-FI : 2.4Ghz 802.11 b/g/n/e/i
• Bluetooth: Yes
• Connection Protocol: OCPP 1.6J
• App and Back Office: SYNC EV
• Operating Temp: -25 TO +40°C
• Software & Firmware Upgrade: Over-The-Air
• Warrenty: 3 Years
• Standards & Approvals: IEC61851-1, IEC61439-7, IEC 62955, IC 61851-21-2, BS EN62196, EN301 511, EN 301 908-1/2/13, EN 301 489-3, EN 300 330, EMC COMPLIANT, CE, UKCA, DEKRA CERTIFIED
• Supplied Accessories: 5x base fixing caps, 5x assembly lid bolts, 1x blanking plug and 1x 25mm compression gland, user-side connector, cord grip and 2x cord grip assembly screws
• Aditional: Built-in Spirit Level