HS Recessed Occupancy Detector (HSODR)

The recessed model is installed in a similar way to installing a down lighter. Just hold back the integral retaining spring clips and offer the detector through a pre-cut hole of 65mm in the ceiling. Always remember to locate any PIR away from secondary heat sources such as radiators, as this could instigate an un-required activation of the load.

Features:

• Energy Saving
• Easy To Install
• Adjustments To Timer & Lux Level can be made without de-installing

Technical:

• AC Operated
• Adjustable LUX control
• Adjustable Time Delay
• Identifies Day and Night Automatically
• Detection distance: 8m max (<22°C)
• Detection range: 120°(side view) 360°(front view)
• Light-control: 3LUX~1000LUX(adjustable)
• Time-delay: 10sec~14 min ± 1min(adjustable)
• Rated load: Maximum 2000W incandescent lamp (resistive load/230V/AC)
• Maximum 1000W fluorescent lamp (inductive load/230V/AC)
• Installation height: 2m~4m
• Power consumption: 0.5W (static 0.2W)
• Detection motion speed: 0.6~1.5m/s
• Working humidity: <93c/oRH
• Working temperature: -20~40°C
• IP44
• Cut Out: 65mm
• Width: 70mm
• Height: 75mm