Aico 10year Lithium Optical Smoke Detector
The Detector features a large easy to ude test button which can also be used to silence nuisnace alarms, e.g. cooking fumes, for a 10 minute period.
The optical alarm is sensitive to all domestic fire types but is especialy sensit..
Aico 10year Lithium Heat Detector
The Aico EI603 is a battery operated 10 Year Lithium Battery Powered Heat Alarm suitable for installation in kitchens and areas where smoke alarms may be subjected to false alarms. The heat alarm has a fixed temperature fast response thermistor sensor.
The EI603 h..
Aico Battery Carbon Monoxide Alarm (EI208)
The Ei208 is a Carbon Monoxide (CO) Alarm that is powered by a sealed-in Lithium battery.
The alarm has a high performance, proven electrochemical sensor to sense CO presence. The sensor is individually calibrated and tested in CO gas on assembly to ensu..
Aico (EI144) Heat Detector 240v/Batt.
The Ei144RC is Heat Detector that runs on 230V AC mains power, and has a 9V PP3 Alkaline Battery back-up capable of lasting up to 4 years in standby mode and capable of powering the alarm for up to 2 years without mains power.
The detector gives a fire warni..
Aico (EI146) Optical Smoke Detector 240v/Batt.
The Ei146RC is an Optical Smoke Detector that runs on 230V AC mains power, and has a 9V PP3 Alkaline Battery back-up capable of lasting up to 4 years in standby mode and capable of powering the alarm for up to 2 years without mains power.
Aico (EI168) Radio Base For 140/160 Range
The Ei168RC is designed for use with 2100, 160RC and 140 series smoke and heat alarms to enable a comprehensive system without the need for a cable between any alarms.
The Ei168RC is powered by 230V AC mains. It has a built in tamper proof Rechargeable Li..
Aico Call Point (MCP401RC)
The MCP401 RC is a Manual Call Point that runs on 230V AC mains power. It has built in rechargeable Lithium cells that act as a battery back-up in the event of mains failure. These rechargeable cells are designed to have a ten year life and outlast the life of the unit it..
Aico Radio Call Point (EI407)
The Ei407 Manual Call Point is an emergency device that when activated transmits a RadioLINK alarm signal. This alarm signal will cause all RadioLINK alarms in the system to sound and thereby warn occupants of the immediate danger.
The Manual Call Point is powered b..
CK 160mm Combi Cutter 3
The Ei450 Alarm Controller is designed for use with RadioLINK enabled Smoke, Heat and Carbon Monoxide (CO) alarms
It will indicate if the source of alarm is smoke/heat or CO alarm
It increases the flexibility and user friendliness of the alarm system by allowing t..